Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

OK. Educate me.

Posts

OK. Educate me.

#1

Alan Sweet

OK.  Educate me.

Alan Sweet

How do I post PIcs with my message?

Evidently I'm doing incorrectly.

Example, I have a png file named Ornaments.png located on my puter in the C:/temp/ folder,

so I tried pasting a copy in with my text. No good.

So I tried entering file:///C:/temp/Ornaments.png in Optional Image URL. No Good.

So I tried C:/temp/Ornaments.png, No good.

So I'm a bit frustrated here. Is there a help file for messages somewhere that explains all this?

If not, can someone explain it to me?

Re: OK. Educate me.

#2

Re: OK.  Educate me.

John McGaw

Probably in the FAQs under "How do I upload photos with my messages?"

Re: OK. Educate me.

#3

Alan Sweet

Re: OK.  Educate me.

Alan Sweet

OK... It says..

"To upload an image from your computer, first be sure it is smaller than the file size limit for that type of permitted file type. (Click the little blue button next to the "Upload embedded file" box to see the permitted file types and the size limits for each.)"

The file size is 770 k.

I have received no error messages about it being to big.

I do NOT see a little blue button, NOR do I see any box titled "Upload embedded file" .

I do have two lines under the text box

"To include an image with your text,

if it's on the internet, provide its URL address"

Then a box titled "Optional Image URL:"

It is this last box where I pasted the path name.

Evidently I am logged on, so is there some setting I may have set incorrectly.

Re: OK. Educate me.

#4

Re: OK.  Educate me.

Barry Irby

I am the wrong guy to answer this, I am barely computer literate. Do you have a Profile? You must have a profile to up load pics. I thought the file size was under 100 K. (???) I have been cutting mine down to that.

Re: OK. Educate me.

#5

Alan Sweet

OK I have a profile.

Alan Sweet

And you are right about 100k. Let me test again putting a path name in the Optional Image URL: box. The Flame_Maple.png file 37K


img

Re: OK. Educate me.

#6

Alan Sweet

Re: OK I have a profile.

Alan Sweet

Time to log off and have a cup of coffee.

Re: OK. Educate me.

#7

Kneale Brownson

Re: OK.  Educate me.

Kneale Brownson

Easiest (no real upload limits) is to host the picture somewhere on the net (I use http://www.pbase.com/) then cut the URL for the picture (control/C) and paste it (control/V) into this formula:


or else use the optional image URL box at the bottom of your message box.

Re: OK. Educate me.

#8

Alan Sweet

Re: OK.  Educate me.

Alan Sweet

What formula..

Sounds like it would just be easiest for me to forget trying to load pics here.

Re: OK. Educate me.

#9

Pictures come from two different places...

Bill Houghton, Sebastopol, CA

...and get loaded in two different places.

The "Optional Image URL" is for posting pictures that are publicly available somewhere on the Internet (just as the "Optional Link URL" is for posting links to non-image stuff available on the Internet). Say you find a really good picture of a piece of furniture someone made, and you want to use it as an example of good design. You copy the Internet address (URL) for that picture, and paste it into the "Optional Image URL." On a Mac, you hover your cursor over the picture and right click, then select "Copy Image Location." I betcha Windows machines have some similar protocol. Make sure the URL, when you paste it, ends in one of the image tags, like jpg. Also be sure to remove the "http://" in the box before doing your pasting. That picture will appear at the bottom of your message; I've put a picture of Judy Kensley McKie's leopard sofa and some of her cabinets below as my example of good design (I'm not so fond of her cabinets, but love that sofa, even though it would never fit in my house).

If you have pictures on your computer, on the other hand, and you want to show one or more in a post, put your cursor where you want the picture, then click on the "browse" button just above the box where you type your message. That should take you to your computer, where you wander around until you find the picture you want to post, and double click on that. Wood Central will import the picture, and you'll get a long string of text that is the picture. If your picture won't work -- too big, wrong image format -- you'll get a message to that effect.


Just above here is my Stanley 75 with the palm rest I added that improves it from dreadful to mediocre. You can place these uploads, more than one per message if you want (not sure what, if any, limit there is), wherever in the message makes sense. So, say you're explaining how you did a particular project. You can start with a picture of a pile of wood, then show your layouts, then various techniques, and ultimately close with a picture of the piece of furniture (lovely assistant, grandchild, dog, etc. posed next to it optional). Before and after each picture, you can explain what you're doing, what you learned, and so on.

Now that you have a profile, you can see my e-mail address. Contact me if you have more questions; I'll be spending the afternoon helping my son move, so wouldn't reply until later tonight or even tomorrow, but I'll do my best to help you figure this out if the instructions above don't help (also: reread the FAQs).

Bill Houghton

one of the moderators


img

Re: OK. Educate me.

#10

Alan Sweet

Re: Pictures come from two different places...

Alan Sweet

OK.

Messages... Reply.

You typed "If you have pictures on your computer, on the other hand, and you want to show one or more in a post, put your cursor where you want the picture, then click on the "browse" button just above the box where you type your message." ....

1. There is no "browse" button just above the box where you type your message. There are 3 boxes.. Your Name: Your E-Mail Address: Subject: and one text "Text:", Then the box in which I am entering this message.

2. There is no browse button of any sort anyplace on this page.

Can this be a setting I have not set correctly so some sort of browse button will appear?

Re: OK. Educate me.

#11

Re: OK.  Educate me.

John McGaw

All I can say is that there should be a Browse button but I don't have a clue as to why you shouldn't at least see something similar to what I do as long as you have a valid profile and are logged in. Sorry.


Re: OK. Educate me.

#12

Ah.  Didn't look closely *LINK*

Bill Houghton, Sebastopol, CA

You don't yet have a profile (I can tell because your name doesn't show as a link, which is the clue that someone has a profile).

If you attempted to establish a profile without deleting Wood Central-related cookies from your computer, you didn't succeed. Go to the link below for instructions, but before you begin, get rid of all Wood Central-related cookies (every computer does this a little differently; if you're not sure how on yours, try googling "cookie deletion [your operating system]," and see if you can find some instructions).

This cookie deleting is very important, because, the first time you posted a message, Wood Central's software and your computer traded cookies so Wood Central would recognize you next time you posted.

But, to create a profile, you have to create a password, and this password gets linked up with a cookie...and if Wood Central finds a cookie with your name on it in the files, it assumes this step was already taken care of, and won't let you do it.

If, when you go to create a profile, you find the process is skipping over steps, that means you haven't deleted the right cookies yet. Go back and do some more cookie-deleting.

Lots of hassle, it seems like; but the additional features that come with having a profile are worth it for most folks.


http://www.woodcentral.com/faq/profiles.html

Re: OK. Educate me.

#13

Re: OK.  Educate me.

Joseph Mulherin, sr

Alan, I had the same problem many months ago when I wanted to post pics of my rocking chairs. With all the frustration of attempting to post pics from anywhere it just got me so frustrated I just gave up.

Other websites have their own methods and it seems to me there should be just ONE method for everyone to use at any website.